首页 > 产品信息 > 电子、电力 > 通信和广播电视设备 > 通信卫星设备

 FEATURES: -

Transcoding function
    Airplay feature
    Opera Browser
    HbbTV
    HDMI 1.4
    HD PIP
    Gigabit Lan
    Plug and Play support for 2.5 "SATA - Hard Drives
    12 character VFD display
    External 12 V power supply

Technical highlights:-

    1300 MHz MIPS processor
    128MB Flash
    1GB DDR3 DRAM
    Gigabit Lan
    1 x DVB Common-Interface Slot
    2 x Smart Card Reader (Xcrypt)
    3 USB ports (1x front, 2x rear)
    SPDIF optical audio output (digital)
    1 x HDMI 1.4 video / audio output (digital)
    1 x Scart (TV)
    1 x RCA video output
    2 x audio output (L / R) RCA (analog)
    Plug and Play support for 2.5 "SATA - Hard Drives
    unlimited channel lists for TV / Radio
    EPG (electronic program guide) support
    Support of Bouquet lists
    OSD in many languages ​​and skin-support
    automatic / manual channel search
    DiSEqC 1.0/1.1/1.2, USALS
    External 12 volt power supply
    Power switch

VU + Solo ² Specifications:-

2 x DVB-S2 tuners
Input frequency range 950 .. 2150 MHz
Signal Level - 65 dBm ... - 25 dBm
Tuner Input Connector F-Type female
Input impedance 75 ohms
AFC + / - 3.5 MHz
QPSK and 8PSK demodulation
FEC Viterbi and Reed-Solomon
Viterbirate 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
Roll-off Factor 35% Common-Interface:
Common-Interface Power Consumption max. 0.35 A/5V video decoding:
Video Compression MPEG-2 / H.264 and MPEG-1 compatible
Video Standard PAL G / 25 Hz, NTSC
4:3 / 16:9
Letterbox for 4:3 TV-Device Output Digital:
Output Level 0,5 Vss on 75 Ohm
Frequency: 32 kHz, 44.1 kHz, 48 kHz
S / PDIF optical, coaxial (AC3) audio decoder:
Audio compression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main / sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog:
Output Level L / R 0,5 Vss on 600 Ohm
TH t; 60 dB (1 kHz)
Crosstalk <-65 dB Video parameter:
Input Level FBAS 1 Vss + / - 0.25 dB on 75 Ohm TV Scart:
Output: FBAS, RGB, Ethernet over OSD:
1000/100/10 MBit compatible interface USB:
USB 2.0 connector (3x) LNB power and DVB-S2 Tuner:
LNB Current 400mA max. , Short-circuit proof
LNB Voltage horizontal "no load 19.5 V" 17.6 V at 400mA
LNB Voltage vertical "no load 14.5 V" 11,8 V at 400mA
LNB is switched off in the standby mode, control of the satellite position:
DiSEqC 1.0/1.1/1.2 and USALS - Rotor Control Power consumption:
<13W (in operation, with LNB)
<12W (in operation, without LNB)
<0.5 W (Deep-Standby-Mode) Input voltage:
External power supply:
Input:
110-240V AC / 50-60Hz / 1,0 A
Output:
12V = / 3,5 A
 
Further information on VU + Solo ²

    Ambient Temperature +15 ° C. .. +35 ° C
    Humidity <80%
    Dimensions (W x D x H): 280 mm x 200 mm x 50
    Weight: 2.0 kg without HDD

Note: We supply these receivers strictly as FTA only. We will not provide them with any patches pre-loaded and we can not help with any support for this. We provide support for the actual VU+ hardware and for FTA reception only