首页 > 产品信息 > 工业设备 > 通用机械 > 电焊、切割设备

 DNT系列多关节摇臂台面点焊机

 

整机特点：

 

此焊机除有普通点焊机的特点外，下电极为平台式：焊接范围大，焊后工件平整、不易变形。

 

上电极为多关节摇臂式，焊接方便，不用移动工件，只移动焊枪即可，整个台面内焊接。

 

同时焊接平台可在200mm范围内任意升降，方便不同形状和高度产品焊接。

 

操纵灵活自如，安全可靠。

 

 

主要技术参数：

 

额定功率：50KVA~150KVA 

额定电压：220V/380V~420V（任选）  频率：50Hz/60Hz

气源气压：≥0.5Mpa; 

电极压力：≥2.2KN;

台面尺寸：800×1000mm;   

台面高度：750～950mm（200mm自动升降）;

焊枪形式：水平式/垂直式（任选一种或两种） 

焊枪总长：395mm（可配垂直式焊枪）;

额定占载率：50%

冷却水量：4-6L/min   

电极尺寸：Φ16×50mm  锥度：K=1：10

设备尺寸：长：1280mm×宽：1000mm×高：1890mm;

设备重量：850Kg

 

 

DNT Series Table Spot Welding Machine

 

Main Feathers and Applications:

 

Besides the basic characteristics of common spot welding machine,the lower welding electrode was design as flat desk:welding range increase, the welded workpiece is very flat, not deformed.

 

The up welding electrode is designed as Multi-joint arm, welding easily, without moving workpiece,only move the welding gun,can weld any position in the range of the down flat table.

 

At the same time in the 200mm range the lower welding plat table can go up and down freely,by this way it is suitable for welding various shape and size of products.

 

Easily operating and freely,safe and reliable.

Main Specification:

Rated Capacity:50KVA~150KVA,220V/380V~420V（Optional）,50Hz/60Hz

Air Source Pressure: ≥0.5Mpa; 

Electrode Force: ≥2.2KN;

Welding Table Size: 800×1000mm;

Welding Table Height: 750～950mm（200mm Stroke）;

Welding Gun Type:Horizontal Gun or Vertical Gun (Optional) ;  

Welding Gun Length:395mm;

Duty Cycle:50%

Cooling Water:4-6L/min or More;

Welding Electrode Tip:Φ16×50mm (TAPA 1/10)

Machine Size: L:1280mm×W:1000mm×H:1890mm;

Machine Weight:850Kg