首页 > 产品信息 > 建筑、装饰 > 阻燃材料

气凝胶绝热毡--FMB400

FMB400系列产品以纳米二氧化硅气凝胶为主体材料，通过特殊工艺复合而成。具有导热系数低、密度小、柔韧性高、绿色环保、防水等优越性能，同时兼具优越的隔声减震性能，可取代玻璃纤维、石棉保温毡、硅酸盐纤维等不环保、保温性能差的传统柔性保温材料。

Using special nanotechnology, FMB400 combines a silica aerogel with reinforcing fibers to deliver very low thermal conductivity, low density and good flexibility in an environmentally safe product. FMB400 provides excellent properties of waterproof, sound absorption and shock absorption.

FMB400 is an alternative to the common, environment unfriendly, inferior insulation products, such as PU, asbestos insulation felt, silicate fibers, etc.

 

物理性能Physical Properties
	FMB400（2；3；6）
产品厚度Thickness	2mm  3mm  6mm
宽度Width	1200mm
长度Length	30m
使用温度Use Temp.	0-400 ℃
颜色Color	黑色Black
密度Density	200 ± 20kg/m3
导热系数(25℃) Thermal Conductivity	≤0.018W/(m·K)

 

主要性能特点Properties

保温绝热
    FMB400长期最高使用温度达400℃，导热系数仅为传统材料的1/3~1/5，保温后热损失小，空间利用率高，高温下性能优势更加明显。

Superior Thermal Performance
 The maximum use temperature is 400℃,

Its thermal conductivity is 1/3~1/5 of common insulators, helping reducing heat loss and optimizing space utility.

持久耐热
   气凝胶独有的三维网络结构避免了其他保温材在长期高温或受到振动而产生烧结变形、颗粒堆积保温性能急剧下降的现象。

Long service life

Unlike other traditional insulation materials, aerogel ’s three- dimensional, intertwined structure inhibits sintering warpage, and particles stack which may occur under high temperature for long time. Therefore, aerogel insulation has long service life.

 

抗拉抗裂
   有较好的柔性与抗拉强度，可抵抗施工时的拉伸和冷热交替时线性收缩带来的内应力。

Physically Robust

   FMB400 has flexibility and high tensile strength, resisting stretching and stress from linear contraction when temperature changes.

环保防腐
   产品由无机材料组成，不含对人体有害的物质。可溶出氯离子含量极小，对设备和管道无腐蚀。

Environmentally Safe
 Composed of inorganic materials, FMB400 contains no hazard. Stripping little chloridionm will cause no corrosion to the equipments and pipes.

隔声抗震
    对设备进行保温的同时，还可以起到吸声降噪、缓冲震动等功能，提高环境质量，保护设备。

Sound resistance and Shock Absorption
sound resistance and shock absorption help better the environment quality.

便于施工
   产品密度低于200kg/m3，轻巧方便，易于切割，施工效率高 。

Easy to Install

Extremely low density (<200kg/m3) contributes to easy-to-cut and easy-to-install

 

 

 

 

 

 

 

 

不同温度下导热系数Thermal Conductivity at Different Temperature

不同温度下导热系数Thermal Conductivity at Different Temperature
温度（℃）Temperature	100	200	300	400
导热系数(W/(m·K)) Thermal Conductivity	0.017	0.021	0.025	0.030

 

性能参数Specification Compliance and Performance

测试内容 Properties	测试结果Results	测试方法Test Procedure
尺寸稳定性(max) Dimensional Stability	1%	GB/T 8811
压缩性能(min),Kpa,@10%                               @25% Compressive Stress Strain	60	GB/T 13480
	120
燃烧等级Fire Rating	S4	E DIN 5510
烟雾等级Smoke Spread	SR-2
滴落物等级Flaming Droplets	ST-2
烟气毒性FED值,max   LCo	0.1
耐腐蚀性Corrosion Resistance	通过passed	GB/T 3810
拉伸强度(min),Kpa Tensile Strength	100	GB/T 17911

 

施工厚度Thicknesses Required to Prevent Surface Condensation

不同温度、管径时的施工厚度 Thicknesses(mm) vs. Temperature (℃) and Nominal Pipe Size
工况条件：环境温度=25℃,最高表面温度=50℃,风速=0m/s. Design conditions: ambient temperature = 25℃, Wind speed = 0m/s, Max. touch temp = 50℃
公称尺寸DN(mm) nominal size	15	20	25	32	40	50	65	80	90	100	125	150	200	250	300	350	400
200℃	6	6	12	12	12	12	12	12	12	12	12	12	12	12	12	12	12
300℃	12	12	18	18	18	18	18	18	18	18	18	18	18	24	24	24	24
400℃	18	24	24	24	24	30	30	30	30	30	30	30	36	36	36	36	36

以上数据仅供参考，具体解决方案请咨询相关技术人员。

These data are provided as an example only. Actual performance should be determined using the parameters relevant to the particular application. Please contact us for technical ssistance.