型号: | 1A、2A、3A、5A、10A |
---|---|
品牌: | SET |
原产地: | 中国 |
类别: | 电子、电力 / 电子元器件 / 其它电子元器件 |
标签︰ | 温度保险丝 , 热熔断体 , 保险丝 |
单价: |
US $0.03
/ PCS
|
最少订量: | 2000 PCS |
即时通讯: | 最后上线︰2014/05/28 |
如需了解更多SET温度保险丝祥细资料请来电咨询:13825235167 李先生
产品简介 Product Description
SET合金型温度保险丝是一次性不可复位的熔断装置,广泛应用于电器设备的过温保护。温度保险丝主要由低熔点的易熔合金和助熔断剂构成,封装在塑料或陶瓷的外壳内。在正常工作情况下,易熔合金与两根引脚保持连接。当温度保险丝感受到异常发热并达到预定的熔点温度时,易熔合金熔化,并在助熔断剂的作用力下快速彻底断开电路。有瓷管型和方壳型两种外形供选择.
额定电流1A~200A.
动作温度76℃~221℃.
安规认证包括UL,cUL,VDE,TUV,PSE,KTL,CCC和环保RoHS、REACH认证。
产品特点 Features and Benefits
● 低内阻 Low Resistance
● 密封式结构 Sealed Construction
● 径向,轴向两种方式 Radial and Axial Shape
● 额定电流:1A~200A Rated Current: 1A~200A
● 结构紧凑,尺寸小 Compact size and Small size
● 动作温度:76℃~221℃ Function Temperature: 76℃~221℃
● 一次性过温保护 One-time Over Temperature protection
● 精确断开温度±2℃ High accuracy of Cutoff temperature ±2℃
术语 Glossary of Terms
● 热熔断体也称为热断路器或温度保险丝,在本文中这些不同名词都代表同样的产品,为一次性动作而不可复位的装置。
Thermal-link: also known as thermal cutoff or thermal fuse, all are the same in this context, function one only, non-resettable.
● 额定动作温度 Rated Function temperature (Tf ):
通10mA的负载电流时,加热使温度保险丝断开的温度。
The temperature of the Thermal-link which causes it to change its state of conductivity with a detection current up to 10mAas the only load.
允许偏差 Tolerance: +0℃, -10℃ UL,VDE,IEC标准 Standard
允许偏差 Tolerance: ±7℃ (仅限PSE标准)only PSE
实测熔断温度 Fuse temperature (Fuse-temp):
置于油池中,通10mA以下的负载电流,每分钟升温0.5℃~1℃,测断开温度。
The temperature is measured with silicone oil bath of which temperature is increased at the rate of 0.5℃~1℃/ min, with adetection current up to 10mA as the only load.
● 保持温度 Holding temperature (Th) :
持续通额定电流168小时不断开的最高温度。
The Max. temperature at which a TCO will not change its state of conductivity when conducting rated current for 168Hour.
● 极限温度 Max. temperature limit (Tm):
不破坏机械和电气特性所能承受的最高温度。
The Max. temperature at which the TCO can maintain its mechanical and electrical properties without being impaired for 10mins.
● 额定电流 Rated current (Ir):
温度保险丝分类用,允许用于电路并安全断开的最大电流。
The current used to classify a Thermal-link, which is the Maximum current that thermal cutoffs allow to carry and are able to cutoff the circuit in safety.
● 额定电压 Rated voltage (Ur):
温度保险丝分类用,允许用于电路并安全断开的最高电压。
The voltage used to classify a Thermal-link, which is the Maximum voltage that is allowed to apply to the circuit in which the
thermal cutoff is used.
● 瞬态过载电流Transient overload current (Ip):
温度保险丝在不破坏特性的情况下,所能承受的最大瞬态过载电流。
A direct current pulse train which the thermal-link is able to withstand without impairing its characteristics.
安规认证 Agency Approvals
型号表
型号 | 额定动作温度 | 实测动作温度 | 保持温度 | 极限温度 | 额定电流 | 额定电压 | UL | CUL | PSE | VDE | TUV | CCC | KTL | RoHS |
F0 | 76 | 73±2 | 53 | 200 | 1A | 250Vac | ● | ● | ● | ● | ▲ | |||
F18 | 86 | 81±2 | 61 | 200 | 1A | 250Vac | ● | ● | ● | ● | ▲ | |||
F1 | 102 | 98±2 | 79 | 200 | 1A | 250Vac | ● | ● | ● | ● | ● | ● | ● | ▲ |
F2 | 115 | 111±2 | 91 | 200 | 1A | 250Vac | ● | ● | ● | ● | ● | ● | ● | ▲ |
F3 | 125 | 121±2 | 100 | 200 | 1A | 250Vac | ● | ● | ● | ● | ● | ● | ● | ▲ |
F4 | 130 | 125±2 | 106 | 200 | 1A | 250Vac | ● | ● | ● | ● | ● | ● | ● | ▲ |
F8 | 133 | 130±2 | 111 | 200 | 1A | 250Vac | ● | ● | ● | ● | ● | ● | ▲ | |
F6 | 145 | 140±2 | 121 | 200 | 1A | 250Vac | ● | ● | ● | ▲ | ||||
F7 | 150 | 145±2 | 126 | 200 | 1A | 250Vac | ● | ● | ● | ● | ● | ● | ● | ▲ |
F16 | 160 | 154±2 | 135 | 200 | 1A | 250Vac | ● | ● | ▲ | |||||
型号 | 额定动作温度 | 实测动作温度 | 保持温度 | 极限温度 | 额定电流 | 额定电压 | UL | CUL | PSE | VDE | TUV | CCC | KTL | RoHS |
K0 | 76 | 73±2 | 53 | 200 | 2A | 250AC | ● | ● | ● | ● | ▲ | |||
K18 | 86 | 81±2 | 61 | 250AC | ● | ● | ● | ● | ● | ● | ▲ | |||
60DC | ● | ● | ▲ | |||||||||||
K1 | 102 | 98±2 | 79 | 250AC | ● | ● | ● | ● | ● | ● | ● | ▲ | ||
60DC | ● | ● | ▲ | |||||||||||
K2 | 115 | 111±2 | 91 | 250AC | ● | ● | ● | ● | ● | ● | ● | ▲ | ||
60DC | ● | ● | ▲ | |||||||||||
K3 | 125 | 121±2 | 100 | 250AC | ● | ● | ● | ● | ● | ● | ● | ▲ | ||
60DC | ● | ● | ▲ | |||||||||||
K4 | 130 | 125±2 | 106 | 250AC | ● | ● | ● | ● | ● | ● | ● | ▲ | ||
K8 | 133 | 130±2 | 111 | ● | ● | ● | ● | ● | ● | ▲ | ||||
K5 | 135 | 130±2 | 111 | ● | ● | ● | ● | ● | ● | ▲ | ||||
K9 | 136 | 131±2 | 112 | ● | ● | ● | ● | ● | ● | ▲ | ||||
K6 | 145 | 140±2 | 121 | ● | ● | ● | ● | ● | ● | ▲ | ||||
K7 | 150 | 145±2 | 126 | ● | ● | ● | ● | ● | ● | ● | ▲ | |||
K16 | 160 | 154±2 | 135 | ● | ● | ▲ | ||||||||
K15 | 169 | 164±2 | 145 | ● | ● | ● | ● | |||||||
K32 | 205 | 199±2 | 169 | 250 | ● | ● | ● | ● | ▲ | |||||
K31 | 221 | 218±2 | 188 | 250 | ● | ● | ● | ● | ▲ | |||||
型号 | 额定动作温度 | 实测动作温度 | 保持温度 | 极限温度 | 额定电流 | 额定电压 | UL | CUL | PSE | VDE | TUV | CCC | KTL | RoHS |
X0 | 76 | 73±2 | 53 | 200 | 3A | 250AC | ● | ● | ● | ● | ▲ | |||
X18 | 86 | 81±2 | 61 | 250AC | ● | ● | ● | ● | ● | ● | ▲ | |||
60DC | ● | ● | ▲ | |||||||||||
X1 | 102 | 98±2 | 79 | 250AC | ● | ● | ● | ● | ● | ● | ▲ | |||
60DC | ● | ● | ▲ | |||||||||||
X2 | 115 | 111±2 | 91 | 250AC | ● | ● | ● | ● | ● | ● | ▲ | |||
60DC | ● | ● | ▲ | |||||||||||
X3 | 125 | 121±2 | 100 | 250AC | ● | ● | ● | ● | ▲ | |||||
60DC | ● | ● | ▲ | |||||||||||
X4 | 130 | 125±2 | 106 | 250AC | ● | ● | ● | ● | ● | ● | ▲ | |||
X8 | 133 | 130±2 | 111 | ● | ● | ● | ● | ● | ● | ▲ | ||||
X5 | 135 | 130±2 | 111 | ● | ● | ● | ● | ● | ● | ▲ | ||||
X9 | 136 | 131±2 | 112 | ● | ● | ● | ● | ● | ● | ▲ | ||||
X6 | 145 | 140±2 | 121 | ● | ● | ● | ● | ● | ● | ▲ | ||||
X7 | 150 | 145±2 | 126 | ● | ● | ● | ● | ● | ● | ▲ | ||||
X16 | 160 | 154±2 | 135 | ● | ● | ▲ | ||||||||
X15 | 169 | 164±2 | 145 | ● | ● | ● | ● | |||||||
X32 | 205 | 199±2 | 169 | 250 | ● | ● | ● | ● | ● | ▲ | ||||
X31 | 221 | 218±2 | 188 | 250 | ● | ● | ● | ● | ● | ▲ | ||||
型号
Model |
额定
温度 Tf (℃) |
实测
熔断温度 Fuse-Temp (℃) |
保持
温度 Th(℃) |
极限
温度 Tm (℃) |
额定
电流 Ir (A) |
额定
电压 Ur (V) |
浪涌电流*Imax8/20us(1 Time) | UL | CUL | PSE | VDE | CCC | KTL | ROHS |
Y0 | 76 | 73±2 | 53 | 200 | 5A | AC250 | 5KA | ● | ● | ● | ● | ▲ | ||
Y18 | 86 | 81±2 | 61 | ● | ● | ● | ● | ▲ | ||||||
Y1 | 102 | 98±2 | 77 | 6KA | ● | ● | ● | ● | ▲ | |||||
Y2 | 115 | 111±2 | 89 | ● | ● | ● | ● | ● | ● | ▲ | ||||
Y3 | 125 | 121±2 | 98 | ● | ● | ● | ● | ● | ● | ▲ | ||||
Y4 | 130 | 125±2 | 103 | ● | ● | ● | ● | ● | ● | ▲ | ||||
Y8 | 133 | 130±2 | 108 | ● | ● | ● | ● | ● | ● | ▲ | ||||
Y9 | 136 | 131±2 | 111 | ● | ● | ● | ● | ● | ● | ▲ | ||||
Y6 | 145 | 140±2 | 118 | ● | ● | ● | ▲ | |||||||
Y7 | 150 | 145±2 | 123 | ● | ● | ● | ● | ● | ● | ▲ | ||||
Y16 | 160 | 154±2 | 133 | ● | ● | ▲ | ||||||||
Y15 | 169 | 164±2 | 142 | ● | ● | ● | ● | |||||||
型号 | 额定
温度 Tf (℃) |
实测
熔断温度 Fuse-Temp (℃) |
保持
温度 Th(℃) |
极限
温度 Tm(℃) |
额定
电流 Ir(A) |
额定
电压 Ur(V) |
UL | CUL | TUV | PSE | CCC | KTL | RoHS | |
Model | ||||||||||||||
V0 | 76 | 73±2 | 53 | 200 | 1A | 250AC | ● | ● | ● | ● | ▲ | |||
125AC | ● | ● | ▲ | |||||||||||
50DC | ● | ● | ▲ | |||||||||||
V18 | 86 | 81±2 | 61 | 200 | 1A | 250AC | ● | ● | ● | ● | ▲ | |||
125AC | ● | ● | ▲ | |||||||||||
50DC | ● | ● | ▲ | |||||||||||
V21 | 97 | 93±2 | 70 | 200 | 1A | 125AC | ● | ● | ▲ | |||||
50DC | ● | ● | ▲ | |||||||||||
V1 | 102 | 98±2 | 79 | 200 | 1A | 250AC | ● | ● | ● | ● | ▲ | |||
125AC | ● | ● | ▲ | |||||||||||
50DC | ● | ● | ▲ | |||||||||||
V2 | 115 | 111±2 | 91 | 200 | 1A | 250AC | ● | ● | ● | ● | ● | ● | ▲ | |
50DC | ● | ● | ▲ | |||||||||||
V3 | 125 | 121±2 | 100 | 200 | 1A | 250AC | ● | ● | ● | ● | ● | ● | ▲ | |
50DC | ● | ● | ▲ | |||||||||||
V4 | 130 | 125±2 | 106 | 200 | 1A | 250AC | ● | ● | ● | ● |