首页 > 产品信息 > 化工 > 润滑剂

Castrol Optimol Paste White T
®
嘉实多Optimol粘贴白色T产品数据
嘉实多Optimol粘贴白色T
®
嘉实多Optimol粘贴白色T - 洁净的装配工作白色浆料,
防止微动腐蚀(假brinelling)。紧身组件可能
没有任何困难,甚至解体后多年的运作。
嘉实多Optimol粘贴白色T是很好适用于所有的大会工作
为基薄膜润滑所有工程领域。
嘉实多Optimol粘贴白色T也是可以作为喷雾。
特点
抑制微动腐蚀和虚假brinelling
清洁处理
组装和拆卸方便
分离效果好所有类型的接触
耐冷热水
即使是在盐优良的防锈保护水
白色,几乎无色的薄膜层
简单应用(喷雾无氟氯化碳)
温度适用范围:-30 ° ° F至+250 C/-22℃/ 482 F
美国农业部批准氢气
用途
大会粘贴具有普遍的应用范围,由于其清洁处理
长期分离和润滑效果。高级黑色集会
在性能测试润滑油的各种应用。
防止微动的轴承密封件,花键轴,扭矩加载腐蚀
连接。
嘉实多Optimol粘贴白色T是一个可靠的解决方案暴露机
对摩擦振动。
紧身部件受到震动。
由于这些结果是非常优秀的连接容易烦恼
腐蚀。
避免运转时产生噪音
成功的润滑液压缸
良好的分离时,垫圈或法兰连接密封用。
产品数据
应用
申请前的表面清洁
即使应用层嘉实Optimol粘贴白色T与毛笔或皮棉免费
摇嘉实Optimol粘贴白色T喷涂均匀后使用。喷雾薄
甚至到一层润滑剂润滑表面。
嘉实多Optimol粘贴白色T是唯一贴上特定的应用场合
并不能代替油或脂润滑。
不与其他油脂混合,粘贴或油。
典型特征
白
油脂类化合物+白色
固体润滑剂和矿物油
NLGI一致性,德国DIN 51818,NLGI等级
一
工作渗透,根据DIN ISO 2176,0.1毫米
310-340
密度,德国DIN 51757,公克╱立方公分
1.2000
@ 20 ° C/68号° F
耐水,德国DIN标准51807吨一,
@ 90 ° C/194 ° F
0
埃里克森螺丝测试,总摩擦,德国DIN 946
.77
除常用的制造公差Castrol Optimol Paste White T - white paste for clean assembly work,
prevents fretting corrosion (false brinelling). Tight fitting components may be
disassembled without any difficulties even after many years of operation.
Castrol Optimol Paste White T is excellently suited for all assembly work and
for base thin-film lubrication in all engineering areas.
Castrol Optimol Paste White T is also available as a spray.
Features
inhibits fretting corrosion and false brinelling
clean handling
facilitates assembly and disassembly
good separating effect for all types of contact
resistant to cold and hot water
excellent rust protection even in salt water
white, almost colorless in thin layers
easy application (spray-without CFC)
temperature application range: -30°C/-22°F to +250°C/+482F
USDA-H2 approval
Uses
Assembly paste with universal application range due to its clean handling
and long-term separating and lubricating effect. Superior to black assembly
lubricants in performance tests for a variety of applications.
Prevents fretting corrosion on bearing seals, spline shafts, torque loaded
connections.
Castrol Optimol Paste White T is a reliable solution for machines exposed
to frictional vibrations.
Tight-fitting components subjected to vibrations.
Excellent results as these connections are extremely vulnerable to fretting
corrosion.
Avoidance of squeaking noises
Successful lubrication of hydraulic cylinders
Good separation when used on gaskets or seals on flange connections.
Product Data
Application
Clean surface before application
Apply even layer of Castrol Optimol Paste White T with a brush or lint free
Shake Castrol Optimol Paste White T spray well before use. Spray thin and
even layer of lubricant on to lubricating surface.
Castrol Optimol Paste White T is only suitable for paste-specific applications
and cannot replace oil or grease lubrication.
Do not mix with other greases, pastes or oils.
Typical Characteristics
white
grease-like compound + white
solid lubricants and mineral oil
NLGI consistency, DIN 51818, NLGI Grade
1
Worked penetration, DIN ISO 2176, 0.1 mm
310-340
Density, DIN 51757, g/cm3
1.2000
@ 20°C/68°F
Water resistance, DIN 51807 T. 1,
@ 90°C/194°F
0
Erichsen screw test, total friction, DIN 946
.77
Subject to Usual Manufacturing Tolerances