首页 > 产品信息 > 建筑、装饰 > 建筑涂料

环氧树脂砂浆自流平地坪          Epoxy resin mortar self-leveling floor

适用范围：

适用于机械性能要求高的机械厂、五金厂、码头、车道、汽车飞机修理厂及机械性能、化学性能和美观要求高的医药、卫生、食品工业，医药和其它医疗设施，实验室、洁净室、展览馆等。

APPLlCATlON：

Requirements for mechanical properties of high mechanical factory, metal factory, dock, driveway, car repair shop and aircraft mechanical properties, high chemical and aesthetic requirements of medicine, health, food industry, medicine and other medical facilities, laboratories, clean room , exhibition halls, etc。

性能特点：

选用优质的液体环氧树脂，高级活性释剂和改性脂环胺类固化剂作为成膜物质，采用进口通用色浆配色，填充细料选用高纯度刚玉粉，耐磨佳，抗刮伤能好；填充骨料选用高精度石英砂、金刚砂、刚玉砂骨料，颗粒均匀，机械强度高；产品为A组分（色漆）、B组分（固化剂）、C组分（骨化）三组分包装，现场配合，施工方便，整个系统无溶剂化，大面积无缝施工，一层施工厚度从2-5㎜均可，施工时间大大缩短；现场沙浆层和自流平层一次成型，改多层施工到一次施工，系统强度高；耐重压、耐冲击性好，机械性能优；耐油污、具有较好的化学品抵抗性，也可具有较好的耐紫外线性能（表面可罩一层脂肪族聚氨酯清漆）系统表面根据需要可做成光滑或防滑效果，丝光或哑光均可；系统使用寿命长，硬化收缩率小、无裂缝、抵御一定潮气，面漆可定期维护，不容易起泡。

FEATURE：

Selection of high quality liquid epoxy resin, reactive diluent and senior alicyclic modified amine curing agent as the film-forming material, the use of imported generic paste color, fill fine selection of high-purity alumina powder material, good wear resistance, scratch resistance can be good; fill aggregate use high-precision quartz sand, silicon carbide, corundum sand aggregate, uniform particles, high mechanical strength; products for the A component (paint), B component (curing agent), C-component (ossification) three-component packaging, on-site with the easy construction, the system solvent-free, large area seamless construction, layer thickness from 2-5 mm can be construction, the construction time is shortened; on-site self-leveling mortar layer and forming a layer, change the multi-layer construction to a construction system of high intensity; resistance to stress, good impact resistance, excellent mechanical properties; oil-resistant, has good resistance to chemicals, but also has good resistance to ultraviolet radiation (surface to cover a layer of aliphatic polyurethane varnish) system on the surface may be needed to make smooth or non-slip effect, silk or matt can; system, long life, hardening shrinkage is small, no cracks, resist some moisture, finish regular maintenance can not easy to blister。

使用年限：

厚度2mm/8年，3mm/10年，4mm/12年，5mm/年15以上

SERVlCELlFE：

Thickness 2mm / 8 years, 3mm/10 years, 4mm/12 years, 5mm / 15 or more years

施工工艺：

1.素地处理：打磨、除尘处理
2.底   涂：采用渗透性及附着力特强的环氧封闭底涂
3.砂 浆 层：环氧树脂材料按比例调入石英砂，用镘刀刮平

4.找 平 层：打磨、除尘处理

5.中    涂：批刮环氧树脂自流平中涂材料
6.面    涂：用镘刀将环氧树脂面料镘涂于中涂之上

PROCESSlNG：

1. Process: polishing, dust removal process

2. The coat: the permeability and strong adhesion of epoxy seal coat

3. The sand slurry layer: epoxy resin materials in proportion to call in quartz sand, scrape to evenness with a trowel

4. Looking for a flat layer: polishing, dust removal process

5. The coating: coating in a batch scraping epoxy self-leveling material

6. Surface coating: use a trowel fabrics of epoxy resin trowel on besmear

技术指标Technical index：