| 型号： | hl400/560 |
|---|---|
| 品牌： | 赛特尔 |
| 原产地： | 中国 |
| 类别： | 工业设备 / 其他工业设备 |
| 标签︰ | 滑轮 , 象鼻子 |
| 单价： |
US $10000
/ 件
|
| 最少订量： | 1 件 |
| 最后上线︰2017/05/17 |
The drawing of the welding wire includes rough wire drawing and fine wire drawing.
Rough wire drawing process is to draw the 5.5 welding wire material processed through the wire rod pre-treatment into φ2.45 wire. The 560-series wire drawing machine is used; Fine wire drawing is to draw the φ2.45 wire to various types of welding wire(φ1.6,φ1.2,φ1.0,φ0.9,φ0.8). The 400-series wire drawing machine is used.
Currently the commonly used wire drawing machines in the market are pulley wire-drawing machines and straight-line drawing machines. Straight-line drawing machines include horizontal straight-line drawing machines and vertical straight-line drawing machine.
PULLEY WIRE DRAWING MACHINE
This machine are composed of several of several single block in parallel , which are controlled by the PLC programme. The speed of the machine is controlled by inverter. It can be used to draw metal wires including steel, aluminum, and copper etc. This machine is composed by structure members including capstan device, bridge device, die box, pulley device, cooling device, protective cover, and frame. The material of the capstan is ZG45 spray painting tungsten carbide. The surface is Mirror-surface treated and is rigid and wear without damaging the surface of the welding wire. The capstan adopts inner wall slit-type cooling and box direct cooling. which will provide sound effect .Additionally this wire drawing machines can be used with bobbin take-up machine or trunk type take-up machine.
TECHNICAL PARAMETERS OF PULLEY WIRE DRAWING MACHINES
|
Number |
HL400 |
HL560 |
|
Diameter of Capstan(mm) |
400 |
560 |
|
Maximum Strength of Inlet Wire(mpa) |
~1100 |
~800-900 |
|
Drawing Time |
6~8 |
6~8 |
|
Average Compression Ratio |
21% |
25% |
|
Maximum Diameter of Inlet Wire(mm) |
3.2 |
6.5 |
|
Minimum Diameter of Finished Product(mm) |
0.8 |
2.3 |
|
Highest Drawing Speed(m/s) |
~12 |
~10 |
|
Drawing Power(KW)
|
11 |
18.5~22 |
|
Driving System |
Single or double-stage belt |
|
|
Paying Off Manner |
Automatic damping wire paying off |
|
|
Taking Up Manner |
Wire taking up with constant tension controlled by inverter |
|
|
Suitable Drawing Materials |
Various metal wire, for example welding wire(gas shield welding wire, submerged arc welding wire, flux-cored wire etc); electrode, steel wire (medium and low carbon steel wire, stainless steel wire etc) and cable.
|
|
| 付款方式︰ | TT |
|---|---|
