首页 > 产品信息 > 工业设备 > 工具 > 手动工具

• 本钳子可以对宽度不超过110mm的PVC行线槽进行剪切作业。
• 钳子带有可调角度定位器，可以对线槽进行45°或者垂直的角度进行剪切。
• 剪切刀片采用8Cr13MoV制成，高硬度、刃口锋利、剪切顺畅，不会由于锈蚀影响刃口的钝化。
• 钳身由碳钢制成，合理的硬度和强度保证钳子的耐用性。
• 人体工程化手柄在作业时不易使手部疲劳。
• This tool can cut PVC trunking with a width less than 110mm.
• The tool is equipped with a positioner that adjusts the cutting angle to cut the slot into 45° or 90°.
• The cutting blade is made of 8Cr13MoV, which has high hardness, sharp edge and smooth cutting, and will not affect the passivation of the cutting edge due to rust.
• The parts of this tool are made of carbon steel with reasonable hardness and strength to ensure the durability of the pliers.
• Ergonomically designed handles are less prone to hand fatigue during work.

维护说明：
• 保持钳子的整洁
• 每使用10天或者300次后请在活动部位点注润滑油。
注：钳子的钳体由钢制成，塑料手柄由PP制成，请勿废弃，各材料皆可回收再利用。
Maintenance instructions:
• Please keep the pliers clean and tidy
• Apply lubricant to the active area every 10 or 300 times.
Note: The parts of the pliers are made of steel and plastic PP. Please do not discard them. All materials can be recycled.

SV.010901
剪切宽度Cutting width      ≤110mm
剪切角度Cutting angle      45°/90°
长度Length                       255mm
重量Weight                       0.66kg

使用说明Instructions for use:
① 打开限位锁扣，使钳子自动打开。
② 前后调整角度限位器，使之处于最佳作业位置。
③90°剪切
④45°剪切
⑤ 调整合适后即可剪切作业
⑥ 作业结束后必须闭合钳子关闭锁扣，防止刀片意外割伤。
①Open the limit lock to open the pliers automatically.
②Move the angle limiter back and forth to the best working position.
③90° Cutting
④45° Cutting
⑤Cutting work
⑥It must be closed after being locked to prevent the blade from accidentally injuring the human body.