| 型号： | 68369B |
|---|---|
| 品牌： | 安立 |
| 原产地： | 美国 |
| 类别： | 电子、电力 / 仪器、仪表 / 电子测量仪器 |
| 标签︰ | 68369 , 二手信号源 , 信号源 |
| 单价： |
¥135000
/ 台
|
| 最少订量： | 1 台 |
| 即时通讯: |  | 最后上线︰2018/03/24 |
品牌：Anritsu
型号：68369B 信号源
10MHz~40GHz
Wiltron /68369 B合成信号发生器,10MHz - 40GHz,68369B价格,68369B参数,68369B销售收购租赁热线0755-83614233
The Anritsu / Wiltron 68369B Synthesized Signal Generator is a microprocessor-based, synthesized signal sources with high resolution phase-lock capability. 特制下/ Wiltron 68369 B的合成是一个基于微处理器的信号发生器,合成了具有高分辨率的信号来源锁能力。It generates both discrete CW frequencies and broad (full range) and narrow band sweeps across the frequency range of 10 MHz to 40 GHz. 它产生连续与离散事件的频率和广泛的(全套)和窄频带的频率范围席卷10赫兹到40兆赫。All functions of the signal generator is fully controllable locally from the front panel or remotely (except for power on/standby) via the IEEE-488 General Purpose Interface Bus (GPIB).所有功能的信号发生器是完全可控的本地或远程的前面板(除了电源开/待机)通过IEEE - 488通用接口总线(GPIB)。
| Frequency (GHz) Output Power输出功率频率(同) | Output Power w/Step Attenuator输出功率衰减w /步骤 |
| 0.01 – 2.0 GHz+13.0 dBm0.01 - 2.0兆赫+ 13.0 | +11.0 dBm+ 11.0 |
| 2.0 – 20.0 GHz+9.0 dBm2.0 - 20.0兆赫+ 9.0 | +7.0 dBm+ 7.0 |
| 20.0 – 40.0 GHz+6.0 dBm20.0 - 40.0兆赫+ 6.0 | +3.0 dBm+ 3.0 |
| CW Mode连续波模式 | ||
| Output输出 | Twenty independent, presettable CW frequencies (F0 ? F9 and M0 ? M9)二十独立,presettable连续波频率(F0?F9和M0?M9) | |
| Accuracy精度 | Same as internal or external 10 MHz time base一样的内部或外部10兆赫时间基地 | |
| Internal Time Base Stability内部时间基准的稳定性 | With Aging:随着年龄的增长。 | <2 x 10 -8 /day (<5 x 10 ?10 /day with Option 16)< 2×10 8 /天(< 5×10?/ 10天选项16) |
| With Temperature:温度: | <2 x 10 -8 /C over 0C to 55C (<2 x 10 -10 /C with Option 16)< 2×10 8 0 C / C在55 C(< 2×10 -10 / C选项16) | |
| Resolution决议 | 1 kHz (0.1 Hz with Option 11)1千赫(0.1赫兹选项11) | |
| External 10 MHz Reference Input10兆赫参考外部输入 | Accepts external 10 MHz 100 Hz, 0 to +10 dBm time base signal. 接受外部10赫兹100赫兹,0至+ 10 dBm时间基准的信号。Automatically disconnects the internal high-stability time-base option, if installed. 自动切断内部高稳定性time-base选项如果安装。BNC, rear panel, 50 Ohmn impedanceBNC,面板,50 Ohmn阻抗 | |
| 10 MHz Reference Output10兆赫参考输出 | 0.5 Vp-p into 50 Ohmn, AC coupled. 0.5 Vp-p到50个Ohmn、交流耦合。Rear panel BNC; 50 Ohmn impedance面板BNC;50 Ohmn阻抗 | |
| Switching Time (typical maximum)切换时间(典型的最大) | <40 ms to be within 1 kHz of final frequency在< 40微软赫兹的频率的最后 | |
| Analog Sweep Mode扫模式模拟 | ||
| Sweep Width扫宽度 | Independently selected from 1 MHz to full range continuous sweep精选,独立1兆赫全方位持续打扫一下 | |
| Accuracy精度 | The lessor of: 30 MHz or (2 MHz + 0.25% of sweep width) for sweep speeds of ≤50 MHz/ms.出租人:30兆赫或(2兆赫+ 0.25%的扫宽度)≤50兆赫兹的扫描速度/ ms。 | |
| Sweep Time Range扫描时间范围 | 30 ms to 99 seconds30微软99秒 | |
| Phase-Locked Step Sweep Mode锁相一步扫模式 | ||
| Sweep Width扫宽度 | Independently selected, 1 kHz (0.1 Hz with Option 11) to full range. 自主选择,1千赫(0.1赫兹选项11)到全范围。Every frequency step in sweep range is phase-locked每一个频率扫描范围是锁一步 | |
| Accuracy精度 | Same as internal or external 10 MHz time base一样的内部或外部10兆赫时间基地 | |
| Resolution (Minimum Step Size)分辨率(最低台阶尺寸) | 1 kHz (0.1 Hz with Option 11)1千赫(0.1赫兹选项11) | |
| Steps步骤 | User-selectable number of steps or the step size用户可选择的数目的步骤或步长的大小 | |
| Number of Steps数目的步骤 | Variable from 1 to 10,000变量。从1至10000 | |
| Step Size步长的大小 | 1 kHz (0.1 Hz with Option 11) to the full frequency range of the instrument. 1千赫(0.1赫兹选项11)全频率范围的乐器。(If the step size does not divide into the selected frequency range, the last step is truncated.)(如果步长的大小不分为选定的频率范围,最后一步是被删除的。) | |
| Dwell Time Per Step每一步停留的时间 | Variable from 1 ms to 99 seconds变量从1到99秒女士 | |
| Switching Time (typical maximum)切换时间(典型的最大) | <15 ms + 1 ms/GHz step size or <40 ms, whichever is less小于15 + 1 ms / ms阻抗或< 40步长的大小,无论哪个女士较少 | |
| Alternate Sweep Mode交替扫描模式 | ||
| Sweeps alternately in analog or step sweep between any two sweep ranges. 用模拟或一步清洁工打扫之间的任何两个扫描范围。Each sweep range may be associated with a different power level每一个扫描范围可能与一个不同的功率水平 | ||
| Manual Sweep Mode手动扫描模式 | ||
| Provides stepped, phase-locked adjustment of frequency between sweep limits. 提供走,扫频锁相调整之间的极限。User-selectable number of steps or step size. 用户可选择的数目的步骤或步骤的尺寸。360B VNA SOURCE LOCK MODE360 B VNA源锁定模式 | ||
| Under control of the ANRITSU 360B Vector Network Analyzer, the synthesized signal generator is phase-locked at a typical <8.5 ms/step sweep speed. 控制下的矢量网络分析仪,特制下360 B,合成信号发生器是一个典型锁< 8.5 ms /步骤扫速度。Frequency resolution is limited to 100 kHz频率分辨率限制在100千赫 | ||
