首页 > 产品信息 > 工业设备 > 通用机械 > 雕刻蚀刻设备

 RLP-1224铝板雕刻机
铝板雕刻机加工范围：铝板切割、铝板雕刻、铝板镂铣、铝板加工、天然大理石、花岗岩、人造石、墓碑、里程碑、瓷砖、玻璃等三维浮雕及线雕、切割、倒边、钻孔二维雕刻等。
◆ 床身采用厚壁钢管焊接而成，经高温回火处理，确保机身变形小，刚性好，强度大。
◆ Y轴采用双电机驱动，精选配对，确保运动平稳。
◆ 采用高精级齿轮齿条传动，精度高，速度快，力量大。
◆ 采用进口方形直线导轨，精度高，承重冗余大，寿命长。
◆ 机电全优设计，精选各种电气配件，将故障率降到最低。
◆ 机床配有水槽及自动供水冷却系统。
◆ 全部防尘防水设计，全方位保护机器传动部件。
 
型号RLP-1224
X,Y轴行程 1200×2400mm
Z轴行程 200mm
平台尺寸 1480×3000mm
最大运行速度 20m/min
最大雕刻速度 10m/min
分辨率 0.005mm
重复定位精度 0.05mm
雕刻指令 G代码*,u00*,plt
软件运行环境 Windows98/2000/xp
功率（不含主轴） 2000W
工作电压 AC380V/50Hz
主轴功率  3.3-6.6KW(恒功率)
主轴转速 0-24000rpm/min
RLP-1224 stone engraving machine
Natural marble, granite, artificial stone, tombstones, milestones, ceramic tile, glass and wire three-dimensional relief carving, cutting, back side, drill two-dimensional sculpture
◆ bed welded steel pipe with thick, tempered at high temperature to ensure the body deformation is small, rigid, and strength.
◆ Y axis adopts two-motor drive, select matching, to ensure smooth movement.
◆ Using high accurate rack and pinion drive, high precision, speed, great strength.
◆ imported linear square rails, high precision bearing redundancy, long life.
◆ All excellent mechanical and electrical design, selection of a variety of electrical accessories, to minimize the failure rate.
◆ automatic machine is equipped with a sink and water cooling system.
◆ All dust waterproof design, full protection machinery transmission parts.
 
Model RLP-1224
X, Y axis travel 1200 × 2400mm
Z axis travel 200mm
Platform size 1480 × 3000mm
Maximum operating speed of 20m/min
Maximum engraving speed of 10m/min
Resolution 0.005mm
Repeat positioning accuracy of 0.05mm
G carving instruction code *, u00 *, plt
Software operating environment Windows98/2000/xp
Power (excluding spindle) 2000W
Voltage AC380V/50Hz
Spindle power 3.3-6.6KW (constant power)
Spindle speed 0-24000rpm/min