首页 > 产品信息 > 工业设备 > 制版、印刷设备

Ecoo positive thermal CTP plate for offset printing(computer to plate)
Model: Ecoo-ES

Application:
1) Commercial color printing and newspaper printing
2) Type: Infrared sensitive, positive acting
3) Substrate: EC grained, anodized and PAT treated aluminum
4) Exposure energy: 120mj/cm&sup2
5) Spectral sensitivity: 830nm
6) Developer time&temperature: 20-30s, 23°c
7) Run length: Long, 120, 000+ without baking
8) Working environment: Ordinary day light
9) Coating: Blue

* Run length is always dependent on exposure, processing and press conditions.

Storage:
Store under dry and cool conditions, keep away from chemicals.
Exposure:
Apply on thermal CTP plate setters with following specifications:
Exposure energy: 140mj/cm2
Spectral sensitivity: 800-850nm, peak sensitivity at 830nm
Resolution: Up to 1-99% 200lpi/20u FM

Development:
To achieve the optimum performance of the plate, please use Konita developer DV-T
Replenisher: DV-TR

Properties:
1. Easy-to-use
Able to work under white light; Wide latitude and excellent reliability.
2. High resolution
Special ingredients, together with the optimally distributed formula weight of binding polymers, in the coating of KTP offer fine dots with sharp edges and reproduceimages with rich tone.

3. Consistency
Computerized equipments on our production lines monitor over 50 production parameters to ensure batch-to-batch consistency.
4. Cost-effective
Fast exposure speed without pre-heating; Long run-length.
5. Excellent hydrophilicity:
Multi-grains and hydrophilic treatment (PAT treatment) provides excellent water retaining capability at the non-image area, and thus keep ink-water balance optimally.

Available sizes:
A) Width: 120 - 1, 030mm
B) Length: 210 - 1, 600mm
C) Thickness: 0.14 - 0.30mm
D) Other sizes available on request.