产品描述
深圳市嘉美特工艺礼品有限公司 是生产和销售仿古电话机、古董电话机、复古电话机、电话机、来电显示电话机、工艺电话的厂家 联系人：徐小姐 13631528530 QQ：1095563315 贸易通：szkamite
主要功能：（（如图所示的按键））
1、FSK及DTMF来电双制式兼容
2、40组来电显示记录，回拨以及自动长途回拨；显示最后5组已拨号码，显示通话时间并可重新回拨
3、自动IP和手动IP
4、出局码1位设置，适应虚拟网
5、区域码5位设置，来电过滤
6、单键重拨/重拨
7、彩屏动画，中文语音报号，整点报时
8、10首和弦音，梦幻七彩音乐背光，高品质太空和弦 材质及质量：1、电话机是台湾合成玉，接头、支架、底盘全部为锌合金，牢固结实耐磨，其他电话手柄是塑胶或玉石的，易断不耐磨；
2、电话机电镀全部是24K工业金，黄金色持久不变，耐磨，其他电话支架是塑胶电镀的，没合金电镀的光亮；
售后服务：一个星期保退，一月保换，一年保修!
观：
1、手柄：嘉美特电话的手柄、支架等采用锌合金件压铸而成，显得高档，外观精致。手柄有份量、结实
。尤其是支架，塑料的轻，且很容易断。
2、电镀：嘉美特采用高品质高温水解电镀K金，喷进口保护油，然后高温烘烤，确保金属光泽稳定，保
持时间持久、高贵、更不易不氧化。同类
产品中多采用真空镀膜，易氧化，易变色。
3、陶瓷：表层细腻光滑，彩色光洁，无坑点，无伤痕。别家的陶瓷光洁度不够，坑点多，不光滑。
4、木艺：原实木精打细磨，漆面光滑，仿古效果突出。前后工序均有烘干处理，最大程度减少开裂现象
。
内部：
线路结构优化设计，板材选用优质玻纤板，双面板，防潮湿，抗静电功能突出。电子防雷功能、防盗打
功能（防止并机，损失您的电话费），防静
电接地装置。电子器件品质好、数量足，整体质量好，很稳定，使用时间长。其它厂家用的是普通板材
（纸板），易受潮，造成短路烧坏及器件出
现故障，没有抗静电防护及避雷装置，容易出现按键、听筒、话筒等多方面故障，所以质量不好，容易
坏。
5、功能：免提重拔，一键通，上查下查等普通电话机所具备的实用性功能，其中免提是陶瓷、木制电话
所独有的，按键有来电显示，旋转拔号，无
来电按键，多种按键选择。别的厂家只有一种按键。
6、包装：外有精美彩盒，美观大方，携带方便，内附高压模保利龙，硬度高，扣位合理，运输十分安全
，尤其是木质电话与其它厂家相比更是安全
。其它厂家木质电话包装是用灰卡纸折压合成的，支架、手柄易断，外观低档，运输安全性很低
5.1设置操作
挂机状态下按设置键（长按3秒），进入设置状态，LCD显示“SET 1 DATE ”，此时，用上查、下查键可改变设置项，LCD同时显示对应的设置项。再按设置键进入该项设置。在某项设置完成以后，按设置键进入下一项设置。所有设置均用上查、下查键修改该具体设置项，用删除键退出设置状态。
5.1 Setting Operation：
When Hang-up, pressing SET key with 3 seconds, LCD shows that “SET 1 date” function. use UP & DOWN to change the date. Then you could go to next step with UP & DOWN key . All the setting,pls use UP & DOWN to change. And press DEL to logoff.
5.1.1设置日期/时间
LCD提示“SET 1 DATE”，按设置键确认。进入日期/时间设置后，年的显示闪烁，可按上查、下查键修改，STEP为1，完成后再按设置键进入月的设置，修改方法与年的设置相同，再按设置键可依次修改日、小时和分钟。月和日的设置STEP为1，小时和分钟的设置可分十位和个位分别设置。按SET键确认分钟个位设置时话机会自动清秒。
时间及日期设置完成后，LCD显示屏会自动显示对应的星期以及当月挂历。FSK来电信号自动刷新原有的系统日期时间，DTMF来电信号对原系统的时间，日期的设置无影响。
5.1.1 Date/Time Setting
LCD prompts " SET 1 DATE ", press set button to confirm. Into the date / time settings, the annual display of flashing, can be on the check, the next search key change, STEP 1, then press Set button to enter the completion of the month to set, modify the method and set the same year, and then set the key to in turn modify the days, hours and minutes. STEP month and day is set to 1 hour and minute settings can be divided into 10, and a bit were set. Press SET button to confirm minutes when the bit is set, then the opportunity to automatically clear seconds.
Upon completion time and date settings, LCD screen will automatically display the corresponding calendar weeks and month. FSK caller signal automatically refresh existing system date and time, DTMF telephone signal to the original system, the time and date settings had no effect.
5.1.2设置5位区域码
LCD提示“ SET 2 CODE”，按设置键确认，LCD会显示“CODE-----”，按设置键确认，进入区号的设置，“CODE -----”第一个闪烁（若已设置了区号，则显示设置的区号，区号第一个号码闪烁）。按上查、下查键可设置或修改为0到9，完成第一位设置后，按设置键进入第二位设置，以此类推。
5.1.2 five figure areacode setting
LCD prompts "SET 2 CODE ", press set button to confirm, LCD will show " CODE ----- ", press set button to confirm, enter the area code setting, "CODE -----" first flicker (if set area code, then the display settings of the code, area code the first number flashing). According to the investigation, under the search button can be set or modify the 0 to 9, after the completion of the first one is set, press Set button to enter the second set, and so on.
5.1.3设置出局码
LCD提示“SET 3 PCODE ”，按设置键确认，LCD会显示“ PCODE ”，按设置键确认，进入出局码的设置。“ PCODE- ”闪烁（若已设置了出局码，则显示出局码且闪烁）。按上下查可设置或修改为0～9，完成后按设置键确认并进入下一项设置。
设置了出局码后，在回拨来电时，若号码大于等于6位且首位与出局码不同，话机会自动添加出局码。而回拨去电、预拨号则不考虑添加出局码。
5.1.3 Setting out yards
LCD prompts " SET 3 PCODE", press set button to confirm, LCD displays "PCODE", press set button to confirm, enter the code set out. "PCODE-" flash (if set out yards, it shows that out of yards and flicker). Press up and down or modify the search can be set to 0 to 9, press Set button to confirm the completion and the next one is set.
Set out yards after the callback call, if the number is greater than equal to six yards out and the first and is different from the opportunity to automatically add the words out of yards. The call-back to power, not to consider adding pre-dial-out code
5.2挂机功能操作
5.2 Hook function operation
5.2.1来电接收
收到FSK或DTMF来电后，话机自动侦测并显示来电号码，同时显示来电的日期、时间，并记录这是第几个来电，若是FSK制式，来电显示信号会自动刷新月、日以及时间的设置，而年的设置不变。对于DTMF制式，所有设置均不被改变。由于DTMF信号只含有来电号码，不含来电日期及时间，因此，系统收到DTMF来电号码时，会将已设置的日期及时间赋予该来电号码。LCD同时显示来电序号。若是新号码，会有“新来电”标志同时出现。若是已有号码，则会有“重复”标志出现。
收到新来电后话机会保持显示新来电号码及来电时间，直到接听或有按键。
5.2.1 Call reception
Receive the FSK or DTMF calls, the phone automatically detects and displays the phone number displayed simultaneously call the date, time, and record this is the first of several calls, if the FSK modulation, caller ID, the signal will be automatically refreshed month, day and time of the setting, while those settings remain unchanged. For the DTMF standard, all the settings are not being changed. As the DTMF signals contain only Caller ID, free call date and time, therefore, the system received DTMF phone number, would have set the date and time to give the caller ID. LCD also shows phone number. If the new number, there will be "new phone" signs simultaneously. If the number is already there, you will have a "duplicate" logo appears.
After receiving a new call, then the opportunity to maintain that the new phone number and call time until the answer or buttons.
5.2.2来电查询和回拨
如果来电号码超过12位，则存储后12位。
按下查键进入来电查询状态，配合上、下查键可向上/向下翻查，LCD显示来电的号码、日期及时间等信息。查询到来电后，直接按重拨键或摘听筒，可对来电号码进行回拨；连续按两次重拨键，话机会在首位号码前自动加“0”进行长途回拨。须在开锁状态才能回拨长途来电号码。
5.2.2 calling checking & redialing
If the caller ID more than 12, then the memory after the 12-bit.
Press the check key to enter the call query state, with the upper and lower check keys up / down search, LCD display caller number, date and time information. Look to the call, the redial button or extracts directly from the handset can be carried back to the caller ID; consecutive twice to redial button, then the first number before the opportunity to automatically add "0" to long-distance call-back. Are required to unlock the state long-distance phone number to call back.
5.2.3去电查询
按去电键可循环查询最近拨出的号码和通话时间。若打算对所查到的号码再拨号，直接按重拨键或摘听筒。
去电最多可存32位，若用户使用12位LCD且去电超过12位时，手动翻查进行顺序查看。
5.2.3 dialing Checking
According to the telegraph key can be recycled information on the latest allocation of numbers and talk time. If the intention to found the number of re-dialing, redial button or extracts directly from the handset.
To save electricity up to 32, if the user 12-bit LCD and the power more than 12 hours to manually check to the order of view.
5.2.4删除
在预拨号状态，删除键用来删除错误输入的号码（改错）；在显示来电或拨出号码时，删除键用来删除该条来电，长按删除键3秒可删除所有来电或拨出号码。
5.2.4 delete
When dialing, DEL is to delete the wrong No. ; When the No of calling or dialing, we can also use DEL to delete this phone No record. and to delete all the Numbers record just need 3 seconds with DEL key.
5.3摘机功能操作
5.3 off-hook Funtion Operation
5.3.1来电(去电)查询
摘机后可用上查、下查键查询来电，也可用去电键（单向）查询去电。
5.3.1 Call (to power) Inquiry
After picking up is available on the investigation, the next search key to query calls can also be used to telegraph key (single) query to the electric
5.3.2通话计时
摘机拨号以后，话机自动进入通话计时，不允许手动计时。
5.3.2. Calling Time
Off-hook dialing after the phone automatically call time does not allow manual timing
以上就是帝国风情仿古电话机的所有功能介绍，还有不清楚的地方随时和厂家联系！
