首页 > 产品信息 > 电子、电力 > 通信和广播电视设备 > 网络通信设备

英文多语言版Fujikura 9S 熔接机是一款高精度低损耗的熔接机 ，具备先进的自动化结构并搭载独特的智能刀片管理技术。作为藤仓最新款的熔接机，88S本身性能也是世界顶级层次，搭配最新设计的携带箱和工作台，使它成为远超前代的全新升级版单芯光纤熔接机。

 

智能刀片管理系统

大容量电池

7秒完成熔接，9秒完成加热

大屏显示

强大的自动化功能

光纤固定夹功能

免工具更换电极棒

智能刀片管理技术

可实时监控刀片状态

可自动旋转刀片磨损的面

可在管理界面直接控制旋转刀面

可在管理界面查看刀片高度

 

可兼容松套管光纤

拨动白色塑料，可开启兼容松套管光纤的功能

熔接松套管光纤时，无需像大部分熔接机那样更换光纤夹具

具有醒目的功能开启状态提示

 

可手动更换的电极棒

方便操作人员在电极棒损耗或在户外时进行替换

免去使用工具的步骤，令物镜的维护更方便

重新装好电极棒后记得使用放电校正

极其便捷的套管对准

两夹具边缘距离60mm，热缩套管对准熔接点十分便捷

对整体的熔接加热速度有明显提升

操作更简单，便于新手使用

 

新设计的工作台

可自由拼接和拆分，适应不同环境

内置大空间，可储存各种工具

配有冷却槽，可以安置加热完的热缩套管

技术参数

 

Fujikura 90S fusion splicer is a fusion splicer with a high precision lenses, which provide an accurate core-to-core alignment. Also, these lenses allow the splicer to discriminate between fiber types.

FEATURES

• Splicing time: 7-9 sec (SM FAST mode).
• Heat time: 13-15 sec (for 60 mm sleeves).
• Core alignment technology.
• Advanced image processing technology.
• Fiber discrimination function.
• The faster automated features.
• Time for opening wind protector is 80% lower comparing to the Fujikura 80S.
• Time for placing fiber into heater is 50% lower comparing to the Fujikura 80S.
• Easy fiber protection sleeve positioning.
• The lid of the carrying case may be used as a work table.
• Plenty of space in the carrying case. There are two drawers for storage, and the work tray can be divided into two separate places.
• The sheath clamp is compatible with loose tube fiber.
• Wireless data connectivity allows automatic cleaver blade rotation when the splicer judges the blade is worn.
• The tool can connect two cleavers simultaneously.
• Blade life management: the device displays the remaining blade life, informs about blade height and position change, and when new blade is required.
• Operation manual is installed into the splicer.
• Battery life increased up to 500 recharge cycles.
• Increased electrode lifetime – up to 5000 splicing cycles with one set.
• 5-inch color TFT touch screen display.

TECHNICAL SPECIFICATIONS

Fiber alignment method	active core alignment
Applicable fiber	fiber type	Single mode optical fiber
		Multi mode optical fiber
	cladding diameter	80 μm - 150 μm
Applicable coating	sheath clamp	coating diameter: max. 3 000 μm
		cleave length: 5 mm - 16 mm
Fiber splice performance	splice loss	ITU-T G.652: avg. 0.02 dB
		ITU-T G.651: avg. 0.01 dB
		ITU-T G.653: avg. 0.04 dB
		ITU-T G.655: avg. 0.04 dB
		ITU-T G.657: avg. 0.02 dB
	splice time	SM FAST mode: avg. 7 sec - 9 sec
		AUTO mode: 14 sec - 16 sec
Applicable protection sleeve	sleeve type	heat shrinkable sleeve
	sleeve length	max. 66 mm
	sleeve diameter	max. 6.0 mm before shrinking
Sleeve heat performance	heat time	60 mm slim mode: avg. 9 sec - 10 sec
		60 mm mode: avg. 13 sec - 15 sec
Fiber tensile test force	approx. 2.0 N
Electrode life	approx. 5 000 splices
Dimensions (W × D × H)	170 × 173 × 150 mm
Weight	2.8 kg (with battery)
Environmental condition	temperature	operate: -10°C - +50°C
		storage: -40°C - +80°C
	humidity	operate: 0% - 95% RH non-condensing
		storage: 0% - 95% RH non-condensing
	altitude	max. 5 000 m
AC adaptor	input	AC 100 to 240 V, 50/60 Hz, max. 1.5 A
Battery pack	type	rechargeable lithium-ion
	output	approx. DC 14.4 V / 6,380 mAh
	capacity	approx. 300 splice and heat cycles
	temperature	recharge: 0°C - 30°C
		storage: -20°C - +30°C
	battery life	approx. 500 recharge cycles
Display	LCD monitor	TFT 5 inches with touch screen
	magnification	200 to 300x
Illumination	V-grooves	LED lamp
Interface	PC	USB2.0 Mini B type
	external LED lamp	USB2.0 A type approx. DC 5 V, 500 mA
	ribbon stripper	Mini DIN 6 pin DC 12 V, max. 1 A
	wireless	Bluetooth 4.1 LE
Data storage	splice mode	100 splice modes
	heat mode	30 heat modes
	splice result	20 000 splices
	splice image	100 images
Screw hole for tripod	1/4-20UNC
Other features	automatic functions	splice mode select by fiber type analysis
		discharge power calibration
		wind protector: open/close
		sheath clamp: open
		heater lid: open/close
		heater clamp: open/close
	reference guide	video and PDF file stored in splicer
	sheath clamp	easy sleeve positioning clamp
	electrode	replaceable without tool

 

PACKAGE CONTENTS

• Fusion Splicer Fujikura 90S — 1 pc.
• Battery (BTR-15) — 1 pcs.
• AC Adaptor (ADC-20) — 1 pc.
• AC Power Cord (ACC-14, 15, 16 or 17) — 1 pc.
• USB Cable (USB-01) — 1 pc.
• Fusion Splicer Strap (ST-02) — 1 pc.
• Spare Electrodes (ELCT-16B) — 1 set.
• Fiber Holder Set Plate (SP-03) — 1 set.
• Carrying Case (CC-39) — 1 pc.
• Work Tray Left (WT-09L) — 1 pc.
• Work Tray Right (WT-09R) — 1 pc.
• Work Tray J-Plate (JP-09) — 1 pc.
• Tripod Screw (TS-03) — 1 pc.
• Carrying Case Strap (ST-03) — 1 pc.
• Alcohol Dispenser (AP-02) — 1 pc.
• Quick Reference Guide (QRG-02-E, C or J) — 1 pc.
• Single Fiber Stripper (SS-03 or SS-01) — 1 pc.
• Optical Fiber Cleaver (CT08) — 1 pc.
• Fiber Scrap Collector (FBD-05) — 1 pc.
• Fiber Setting Plate (AD-10-M24) — 1 pc.
• Case for Cleaver (CC-37) — 1 pc.
• Hexagonal Wrench (HEX-01) — 1 pc.