POE-5912 is the Power over Ethernet(POE) Splitter.By using the POE-5912, both data and rlectrical power can be deliverd to non-POE Ethernet-enabled device from a sigle CAT5 Ethernet cable.
Its compact size makes implementation extremely easy.During setup ,this terminal unit can be srt to power up any compatible 5V/9V or 12V Ethernet-enabled device via the volt selector located onthe side.
‧ Network devices at Gigabit speeds all within a compact device
‧ Automatically detects PoE terminals and supplies inline power
‧ Easily install non-PoE devices where a power outlet is not available
‧ Reduce installation and network equipment costs
‧ Safeguards network device with short circuit protection
‧ Adjustable output DIP switch for 5V, 9V, and 12V adjustable output
‧ Converts Non-PoE devices with Power Over Ethernet Support
‧ Auto-sensing power drawn from 802.3af / 802.3at power source equipment(PSE) devices
‧ Supplies power up to 12 -25 watts
‧ Light weight and compact size
‧ 1-Year Warranty
DC Power Plug
DC 5.5*2.5*12 mm (White) / 5.5*2.1*12 mm (Blue) / 4.8*1.7*12 mm (Yellow)
/3.5*1.3*12(Red)mm,
Ordering Information
Part Number
|
Description
|
PoE5912
|
10/100m ,IEEE802.3af (12.95W)
|
PoE5912G
|
Gigabit,IEEE802.3af (12.95W)
|
PoE5912TG
|
Gigabit,IEEE802.3at (25W)
|
PSE808 8-Port PoE+ Switch
PSE818 8-Port Gigabit PoE+ Switch
PSE808W 8-Port PoE+ Web Smart Switch
PSE802G 1-Port Gigabit PoE+ Injector
PSE801 1-Port 10/100m Non-standard PoE
Specification
Data Rate :10/100/1000 Mbps
Input Power Requirement: 1/2(+),3/6 (–) or 4/5(+),7/8(-)
Input Power Voltage:
PoE5912: 48Vdc/0.3A,
PoE5912at: 48Vdc/0.6A
Output Power:
PoE5912: 5V(2A),9V(1.1A),12V(1A)
PoE5912TG: 5V(4.5A),9V(2.5A),12V(2A)
Jumper Cable: DC 2.1x5.5x 9.5mm, (L-300mm)
Dimensions: 80 mm x 55 mm x 31 mm
Weight .76g
Diagnostic LEDs: DC Power (Green)
Connectors: Shielded RJ-45, EIA 568A and 568B
Environmental Conditions :
Operating Ambient Temperature: -10 to 45℃
Regulatory IEEE 802.3at, IEEE 802.3af,
Compliance RoHS Compliant , CE
Safety Approvals CE,FCC,EN 60950:2006