首页 > 产品信息 > 化工 > 胶黏剂

TREMCO Proglaze ETA3-D Molded Corner Connections are engineered from 40 Durometer Dense Translucent Silicone used for making connections to our ExoAir Air Barrier Membrane systems with Spectrem 1 Silicone Sealant. The 3-D molded corners have been designed in such a way so that they may be used to overlap one another or used in conjunction with other Proglaze ETA components to accommodate complex transitions。（TREMCO Proglaze ETA3-D Molded Corners接头由40硬度密半透明硅胶制成，用于连接我们的ExoAir空气屏障膜系统和spectrm 1硅酮密封胶。3-D模塑角被设计成这样的方式，使它们可以相互重叠或与其他Proglaze ETA组件一起使用，以适应复杂的过渡）

Basic Uses基本使用：

Proglaze ETA3-D Molded Corner Connections are designed to facilitate transitions when construction sequencing has the surrounding façade being installed prior to the wall or window system.（Proglaze ETA3-D模压角连接的设计是为了便于在施工顺序将周围的立面安装在墙壁或窗户系统之前进行过渡。）

ETA is compatible with and recommended for use with all Tremco ExoAir Air Barrier products.（ETA与所有Tremco ExoAir空气屏障产品兼容并推荐使用。）

Allows complex connections to the wall or window system, which may be recessed or set proud from the plane of the weather barrier surface.（允许与墙壁或窗户系统进行复杂的连接，这些系统可以嵌入或从天气屏障表面的平面上设置。）

Field fabrications of saddle-flashings.（鞍座闪光装置的现场制造。）

Transitions the weather barrier across seismic drift joints at the heads of punched openings.（在穿孔孔头部的地震漂移缝中过渡天气屏障。）

Ability to create a flexible sill pan.（能够创建一个灵活的平面。）

FEATURES & BENEFITS功能与优点：

The translucent silicone in Proglaze ETA allows the installer and inspector to see through the gasket to verify that the recommended amount of sealant is properly applied to the surface. This allows the confirmation that an effective seal has been achieved. At the same time, the ribs included in the gasket’s design are able to ensure a minimum sealant thickness. The ribs on both surfaces allow the profile to be rotated in any position to prevent compressing the silicone sealant to a thin film at the bond surface. The material is easily trimmed to fit around projections, while allowing easy lap joints with Proglaze ETA connections.（Proglaze ETA中的半透明硅胶允许安装人员和检查人员透过垫片查看，以验证推荐量的密封胶是否正确应用于表面。这样可以确认有效的密封已经实现。同时，衬垫设计中的肋条能够确保最小的密封胶厚度。两个表面上的肋允许型材在任何位置旋转，以防止在粘合表面将硅酮密封胶压缩成薄膜。材料很容易修剪，以适应周围的投影，同时允许轻松搭接与Proglaze ETA连接。）

1、Absorbs thermal movement（吸收热运动）

2、Absorbs wind-loading stresses（吸收风荷载应力）

3、Spans and seals irregular window geometries（跨越和密封不规则的窗口几何形状）

4、Field fabrications of saddle-flashings（鞍座闪光装置的现场制造）

A minimum contact area on ExoAir Air Barrier Membranes is 1", while a minimum of 3/8" contact area is acceptable on metal, Proglaze ETA extrusions and molded corners. Proglaze ETA is compatible with and recommended for use with all Tremco ExoAir Air Barrier products. Spectrem 1 is included in Proglaze ETA System 1 due to its exceptional performance when used on the polyethylene face of ExoAir 110, ExoAir 110AT, ExoAir TWF, and the cure surface of ExoAir 120, ExoAir 130, ExoAir 220, and ExoAir 230.（ExoAir空气屏障膜的最小接触面积为1"，而金属，Proglaze ETA挤出件和模塑角的最小接触面积为3/8"。Proglaze ETA与所有Tremco ExoAir空气屏障产品兼容并推荐使用。spectrum 1包含在Proglaze ETA System 1中，因为它在ExoAir 110, ExoAir 110AT, ExoAir TWF的聚乙烯表面以及ExoAir 120, ExoAir 130, ExoAir 220和ExoAir 230的固化表面上使用时具有优异的性能。）

The Greenguard Gold certification on Proglaze ETA ensures safety for use in the most sensitive indoor environments including hospitals and schools.（Proglaze ETA的Greenguard Gold认证确保了在最敏感的室内环境(包括医院和学校)中使用的安全性。）

AVAILABILITY可用性：Available as part of project specific order. Contact Tremco Customer Service for more information.可作为项目特定订单的一部分。有关更多信息，请联系Tremco客户服务。

COLORS颜色：Available as a translucent material. Custom colors are available upon request. Contact Tremco Customer Service for more information.（可用作半透明材料。可根据要求定制颜色。有关更多信息，请联系Tremco客户服务。）

LIMITATIONS限制：Not intended to be utilized in a permanently exposed condition unless approved by Tremco. Not intended as a seal to untested substrates.（除非Tremco批准，否则不打算在永久暴露的条件下使用。不适用于未测试基材的密封。）