| 型号： | FC-1325ATC |
|---|---|
| 品牌： | 锋弛 |
| 原产地： | 中国 |
| 类别： | 工业设备 / 通用机械 / 雕刻蚀刻设备 |
| 标签︰ | wood engraving , furniture door , cnc router |
| 单价： |
-
|
| 最少订量： | 1 件 |
| 最后上线︰2017/04/12 |
Scope of application:
Our products have been widely applied in industrial board cutting, mould manufacturing & processing, wooden products processing, building decorating & furnishing, stone, glass, copper, aluminum and advertising products processing, etc.
Features of the machine:
1. lathe adopts square frame industrial structure design, gantry, upright, support plate, pulley, tool rest, using aluminum cast process
2. complete machine adopts imported Japan YASKAWA servo high power drive system.
3. Taiwan planetary reducer system, high precision & high pulling torque.
4. pinion & rack transmission, adopts original imported skew pinion & rack transmission.
5. Taiwan original Sunsang 8 tools circular ATC tool store.Tool changing time just 8 seconds. standard original Italy ISO30 tool holder.
6. ATC spindle adopts Italy HSD 9.0kw air-cooling spindle with very good performance.
7. Motion control system adopts Taiwan SYNTEC special numerical control system.
8. Driving rail adopts original Taiwan imported 25mm square lead rail.
9. Z axis adopts Taiwan TBI original coarse pitch precise rubbing screw rod, high precision transmission
10. Unique Z axis feeding height 250mm, can be suitable for complicated workpiece machining.
11. high performance transducer, high frequency electronic anti-jamming system.
12. Patent design cavate vac-sorb table, minimum adsorb area: 150*150mm, can absorb & clamp.
13. vac-sorb 5.5kw air-cooling oil free vacuum pump, subatomospheric pressure can reach 0.8Mpa
14. standard industrial three axis dust prevention design processing, make whole transmission structure avoid the damage from dust.
15. Self-oil system for the transmission part of the complete machine, extend the service life for each parts.
16. cable adopts YC numerical control machine shielding line, can reciprocate twelve million times.
17. equipped with standard America industrial aviation plugs links, soft metal cable sheath, avoids the cable damage situation from the press & bump effectively.
Performance parameter:
|
Work travel |
1300*2500mm |
|
Feed-in height |
250mm |
|
Resolution |
0.025mm |
|
Spindle power |
9KW（Italy HSD） |
|
Work voltage |
AC380V/50Hz |
|
Idling speed |
60m/min |
|
Spindle rotating speed |
6000-18000rpm/min |
|
Cutter diameter |
Ф3.175 Ф4 Ф6 Ф12.7 |
|
Command code |
G code.uoo.mmg.plt |
|
Adsorb power |
5.5KW |
|
Cutter control pressure |
0.7Kpa |
|
Work mode |
AC servo |
