| 型号： | - |
|---|---|
| 品牌： | 浩海 |
| 原产地： | 台湾 中国 |
| 类别： | 化工 / 涂料和油墨 |
| 标签︰ | 高阻碳浆 , 高阻碳油 , 电位器碳浆 |
| 单价： |
-
|
| 最少订量： | - |
| 最后上线︰2017/05/31 |
1. 高阻高耐磨碳浆
high resistance and high abrasion carbon paste
可提供方阻：10Ω/□～10MΩ/□，线性精度高，表面光泽度好，耐磨度极优，室温阻值变化率小、持久稳定性高，所有方阻规格的温度系数≤±500ppm/℃,表面硬度高，固化膜表面平滑、致密，接触电阻小，滑动噪音小，广泛用于电位器、传感器等产品上，具体请来电来函咨询。
square resistance：10Ω/□～10MΩ/□, high linear precision and surface gloss, excellent abrasion, the rate of resistance change at room temperature is little, high lasting stability, temperature coefficient of all Square resistance specifications:≤±500ppm/℃,high surface hardness, surface of curing film：smooth and dense, Contact resistance and sliding noise are small,
widely used in potentiometers、sensors and other products, welcome to call us for details.
2. 薄膜开关用高阻碳浆
high resistance carbon paste used in membrane switch
单一组份，印刷基材：PET薄膜，优异的柔韧性、印刷性及附着力，表面硬度及光泽度高，阻值持久稳定性高，受温度影响阻值变化极小，阻值线性精度及均匀度高，具体欢迎来电来函咨询。
single component，printing substrate: PET membrane，excellent flexibility、printability and adhesion, high surface hardness and gloss, high lasting stability of resistance, resistance changes affected by temperature is little, high linear precision and uniformity of resistance, welcome to call us for details.
3. FPC高阻碳油
high resistance carbon oil used in FPC
对柔性基材聚酰亚胺（PI）膜的附着力好，柔韧性及抗挠曲性好，方阻：10Ω/□～10MΩ/□,固化膜表面平滑、致密、有光泽，固化膜阻值均匀度高，线性精度高，能满足客户对FPC高阻碳油多种规格要求。
good adhesion on the flexible substrate of polyimide (PI)film, good flexibility, square resistance：10Ω/□～10MΩ/□,surface of curing film：smooth、dense and shiny , high resistance linear precision and uniformity of curing film, can satisfy customers many specifications requirements of high resistance carbon oil used in FPC.
4. PCB高阻碳油
high resistance carbon oil used in PCB
对基材陶瓷板、环氧玻纤板、酚醛电木板等附着力优，印刷性能好，方阻的10Ω/□～10MΩ/□均可提供，固化膜阻值均匀度高，阻值线性精度高，阻值稳定性高，表面外观平滑、致密、有光泽，能满足客户对PCB高阻碳油的各种规格要求。
excellent adhesion on the substrate of ceramic、epoxy board and phenolic board, good printing, square resistance：10Ω/□～10MΩ/□, high resistance linear precision and uniformity of curing film, high stability of resistance, surface of curing film：smooth、dense and shiny ,can satisfy customers many specifications requirements of high resistance carbon oil used in PCB.
