产品描述
|
|
|
Compact spindle servomotors. 紧凑型主轴伺服电动机。
Based on flux concentration technology and controlled by the DIGIVEX Drive range, the HV synchronous servomotors are designed for the spindle motorisation of conventional machines.基于通量浓度控制技术和范围由DIGIVEX车道，在高压同步伺服电动机是专为常规机主轴摩托的。
Developed by Parvex, this technology enables a range of constant power to speed ratio of up to 10 to be covered. Parvex由开发，这项技术实现了功率范围的不断加快，以10比的是包括在内。 And the HV motors have dynamic characteristics equivalent to axis servomotors : very high mass to torque ratio, low inertia, high torque at standstill ...而高压电动机具有动态特性相当于轴伺服电机：非常高的质量比对扭矩，低惯性，在停顿高扭矩...
|
 High torque/weight ratio for increased machine compactness 高扭矩/重量比紧机增加
Low inertia for rapid changes in speed 低惯量在快速变化的速度
Exceptional regulation at low speed 特殊监管低速
Wide speed range at constant power : ratio up to 10 宽恒功率速度范围为：比例高达10
High torque at standstill 高扭矩瘫痪
Possibility of positioning for tool changes 变化的可能性定位工具
|
 Click here for "HV/HW-Series Servo Motors" PDF (257k) 点击这里为“高压/硬件系列伺服电机”PDF格式（257k）
|
| |
Examples of applications 应用实例
Because of their high dynamic qualities and their compactness, HV spindle motors are suitable for the motorisation of high performance spindles (lathes, milling machines, grinders,…).由于其高动态素质和紧凑，主轴电机主轴高压适合表现的摩托高（车床，铣床，磨床，...）。
They are controlled by the DIGIVEX Drive range which provides them with all their qualities and flexibility of use.他们控制的DIGIVEX车道范围内的使用他们提供的一切素质和灵活性。
Synchronous spindle technology is also available for electrospindles with the HW range.同步主轴技术也为electrospindles范围内使用硬件的。
|
| |
|
| |
A range suited to your needs 一个适合您的需求范围
The HV motors are available for :在高压电动机可用于：
Torque from 17 to 240 Nm (150 to 2110 in-lb.)扭矩从17至240牛顿米（150至2110在磅）。
Speeds up to 8000 rpm速度高达8000转
Power from 3 to 45 kW (4 to 60 hp)功率从3至45千瓦（4至60马力）
These motors use flux concentration technology which enables the construction to be more compact and more robust.这些电机的使用量的影响技术，使建筑更紧凑，更强大。
They are characterised by constant torque at low speed, and constant power over a wide range of speeds (1:10), achieved by DIGIVEX Drive.他们的特点是在低速恒转矩和恒功率速度超过了范围广泛（1:10），驱动实现DIGIVEX。
Their low inertia enables greater acceleration for reduction of tool change time and more rapid cycles其低惯性使更多的循环加速急速减少换刀时间和更多
|
|
产品图片
图 1
免责声明：以上信息由企业自行提供，内容的真实性和合法性由发布企业负责。「自助贸易」对此不承担任何保证责任。
举报投诉：如发现违法和不良资讯，请
点此处举报。
